AN EPIRB is a secondary coil mean of DISTRESS alerting which is to say that it comes later in the hierarchy of alerting SAR authorities in case of distress .
It is mandate to carry one EPIRB on every ship and two EPIRBS for all Registered ships ( and early types of vessels ) .
Types Of EPIRB
- COSPAS-SARSAT– EPIRBS under the COSPAS-SARSAT system work on the 406.025 MHz and 121.5 MHz band and are applicable for all sea areas
- INMARSAT E– 1.6 GHz band is the one which this EPIRB works on. These are applicable for sea areas A1, A2 and A3
- VHF CH 70– This works on the 156.525 MHz band and is applicable for sea area A1 only
How Does An EPIRB Work?
The device contains two radio receiver transmitters, a 5-watt one, and a 0.25-watt one, each manoeuver at 406 MHz, the standard international frequency typically signalling distress, 406MHz.
The 5-watt radio vector is synchronised with a GOES weather satellite going around the earth in a geosynchronous orb .
An EPIRB transmits signals to the satellite. The sign consists of an code identification numeral ( all in digital code ) which holds information such as the ship ’ randomness identification, date of the event, the nature of distress and chiefly, the position .
A UIN is a Unique Identifier Number that is programmed into each radio beacon at the factory. The UIN count consists of 15 digit series of letters and numbers that make up the unique identity of the beacon. The UIN is on a white label on the outside of the beacon. The UIN is besides referred to as the Hex ID .
The Local User Terminal ( satellite receiving units or ground stations ) calculates the stead of the fatal accident using Doppler Shift ( is the change in frequency or wavelength of a wave ( or other periodic events ) for an observer moving relative to its source ) .
The LUT passes on the message to the MRCC ( Mission Rescue Co-Ordination Centre ). Furthermore, the MRCC is responsible for the SAR ops and oversees the execution of the rescue mission .
In shell the EPIRB is not compatible with a GPS recipient, the geosynchronous satellite orbiting the earth can pick only the radio signals emitted by the radio. The localization of the transmitter or the identity of the owner can not be deduced in this case .
These satellites can only pick up trace elements of such signals and they can entirely give a rough theme of the placement of the EPIRB. A signal of 406MHz is treated as an hand brake signal as per international standards .
The bespeak could help you in locating the transmitter evening if it is 3 miles aside. The vessel or the individual in straiten could be identified if the EPIRB is registered .
If an emitter transmits signals of 121.5 MHz, the rescuer or concerned party can reach the lost person even if they are at a distance of 15 miles. The accuracy of reaching the prey could be magnified if an EPIRB besides contains a GPS liquidator.
Read more: How Maritime Law Works
Using an EPIRB
The EPIRB needs to be activated to emit signals. This could be done by pushing a button on the unit, or it could happen automatically if and when it comes in contact with water .
The latter variety show is known as hydrostatic EPIRB; the choice makes hydrostatic EPIRBs the best choice for sailors because they could be automatically activated in case the ship or vessel meets an accident and finds itself in deep waters .
The point to be kept in mind is that EPIRB needs activation to be running, and this could happen only when it emerges from the bracket it is placed in. This could be done manually or it could happen automatically, as said earlier. The device is basically battery-operated. This helps because power is the first entity to be affected in sheath of a calamity .
Battery
- 12 Volt battery
- 48 hours of transmitting capacity
- Normally replaced every 2 to 5 years
False Alerting
It is possible that the EPIRB might get activated by mistake by an individual onboard. In order to prevent a chain of SAR operations in motion, it is imperative mood that the EPIRB false infection is cancelled. In case the EPIRB is falsely activated, the nearest slide station or RCC ( Rescue Co-Ordination Center ) must be informed immediately of this consequence and as mentioned, cancel it .
The cancellation hint must besides be sent to the allow authority ( for model, DG Shipping for indian Registered Ships or for ships plying in indian waters when the delusive alert is transmitted ). The shipowner and/or the agent must besides be informed .
Testing EPIRB
The EPIRB should be tested once a calendar month to ensure operational integrity. The procedure to do indeed is as follows :
- Press and release the test button on the EPIRB
- The red lamp on the EPIRB should flash once
- Within 30 seconds of pressing the button, the strobe, as well as the red light, should flash several times
- After 60 seconds of operation, the EPIRB will switch off
Maintenance of EPIRB
- The EPIRB must be inspected visually for any defects such as cracks
- It is advisable to clean the EPIRB once in a while with a dry cloth
- While cleaning, the switches must be specifically checked
- The lanyard of the EPIRB must be neatly packed into the container of the EPIRB without any loose ends dangling about
- The expiry date of the battery must be checked to cover the immediate as well as the next voyage at the least
- Send the EPIRB back to the service agent or the supplier if the EPIRB fails the monthly checks
- Change the battery onboard if the facilities are available or send it to the servicing agent if there isn’t
- If the EPIRB has been used in an emergency, it must be returned to an authorised service agent for a battery change.
- In the event that the HRU has crossed its expiry date, the HRU ought to be replaced on board and HRU must be marked with an expiry date 2 years into the future.
PLBs (Personal Locator Beacons)
PLBs are basically EPIRBs but for individual entities. These are used to indicate distress for an individual not in the proximity of emergency services. PLBs bring in the lapp as EPIRBS and transmit on the COSPAS SARSAT satellite system in the 406.025 MHz frequency. PLBs are much smaller in size as compared to an EPIRB. They work all across the world, at sea a well as on kingdom .
once activated, PLBs air for a minimum of 24 hours ; while the battery life on an EPIRB is at least double ( a minimal of 48 hours ). An EPIRB is registered to a vessel, whereas a PLB is registered to an individual .
The EPIRB is one of THE MOST important emergency pieces of equipment available onboard in the sheath of distress. Their caution, testing and care must be given considerable time in order that they function at their optimum grade when the position arises.
Read more: A Man Quotes Maritime Law To Avoid Ticket
You might also like to read:
Disclaimer: The authors ’ views expressed in this article do not necessarily reflect the views of Marine Insight. Data and charts, if used, in the article have been sourced from available data and have not been authenticated by any statutory agency. The writer and Marine Insight do not claim it to be accurate nor accept any responsibility for the same. The views constitute only the opinions and do not constitute any guidelines or recommendation on any naturally of military action to be followed by the reader .
The article or images cannot be reproduced, copied, shared or used in any form without the permission of the author and Marine Insight.
